Heat Shrink Tape is Made of radiation-crosslinked polyethylene, with a high-tack special hot-melt adhesive compounded on the inner wall. Some models are equipped with epoxy primer, forming a triple protection system. It features excellent core performance: heat shrinkage rate ≥ 50%, initial shrinkage temperature 80℃, full shrinkage temperature 110℃. It shrinks uniformly when heated; the […]
The TS Closed Sleeve (heat shrink sleeve) features an integrated closed structure made of radiation-crosslinked polyethylene, with no overlapping joints. Its inner wall is bonded with high-tack special hot-melt adhesive, forming a fully wrapped protection system. With outstanding core performance: The integrated closed design eliminates overlapping gaps, delivering higher protection integrity, especially suitable for new […]
WSS Open Sleeve – Heat Shrink Sleeve adopts a composite structure of radiation cross-linked high-density polyethylene base material + special hot-melt adhesive, and some models are equipped with two-component solvent-free epoxy primer, forming a triple protection system. With excellent core performance: Open design for excellent construction adaptability! Different from closed sleeves, it does not need […]
Iron core binding wire uses a high-carbon steel core as its skeleton, with an outer protective layer of galvanized or plastic-coated finish. It is rust-proof and corrosion-resistant, suitable for complex environments such as outdoors, humid conditions, and industrial oil contamination, without easy rusting or breaking. It has outstanding core advantages: both strength and flexibility. It […]
Rack Torch adopts a cold-rolled steel thickened fuel tank + copper nozzle, featuring high temperature resistance, corrosion resistance and excellent compression resistance. Equipped with a built-in explosion-proof valve and sealing gasket, it eliminates risks of fuel leakage and deflagration. With outstanding core advantages, the vertical stand design ensures stable placement without tipping over, enabling hands-free […]
It adopts a high-strength brass torch core + stainless steel body, which is high temperature resistant and corrosion-proof, not easy to deform or damage during long-term high-temperature operation. With outstanding core advantages, the flame-concentrating design accurately locks the heating area with concentrated, non-diffused flame, suitable for precise work such as heat shrink tubing, welding, and […]
2:1, 3:1 and 4:1 colored heat shrink tubing feature an eco-friendly irradiated cross-linked polyolefin outer layer and a hot-melt adhesive inner layer, compliant with RoHS standards and free of harmful substances. Start shrink temperature: 80 ℃, full shrink temperature: 110 ℃. When heated, the adhesive layer melts and bonds tightly to various materials, with near-zero […]
Silicone rubber self-fusing tape uses a highly elastic silicone rubber substrate. It is self-bonding and can achieve self-fusing adhesion without the need for primer. After wrapping, it forms a seamless and dense protective layer with strong adhesion, preventing loosening or edge lifting. It features excellent insulation performance with a breakdown strength of ≥25 kV/mm, suitable […]
Industrial Armor Wrapping Tape uses glass fiber or polyester fiber reinforced base material with a special pressure-sensitive adhesive layer. It features high toughness, wear resistance and excellent tear resistance, with tensile strength ≥ 15 MPa, which can effectively resist heavy impact, mechanical friction and external crushing. It quickly adheres to the substrate after wrapping to […]
Waterproof insulation tape uses butyl rubber or a special waterproof adhesive layer as the base material, with strong and long-lasting viscosity. After wrapping, it fits tightly to cables without gaps or water seepage, reaching a waterproof rating of IP67. It features excellent insulation performance, with a breakdown strength of ≥20 kV/mm, suitable for low‑voltage to […]